Kramer-electronics RC-3TB Bedienungsanleitung PDF herunterladen

RC-3TB Remote Control Panel

Congratulations on purchasing your Kramer RC-3TB Remote Control Panel.

The RC-3TB is used to remotely replicate buttons of a Master Controller, such as

the SL-14RC.

See the SL-14RC Master Controller User Manual for details regarding the

following:

 Defining the RC-3TB Remote Control Panel

 Rotary switch description

 Termination

 Connecting multiple RC-3TB Remote Control Panels

Button Labels

The backlit button caps are transparent and can contain the printed labels supplied.

Installing the Button Caps and Button Labels

To install a button cap and button label:

1. Using a screwdriver, remove the two screws holding the faceplate on and

remove the faceplate. Place the faceplate and the screws aside.

2. Extract the required button labels from the sheet of labels supplied (see Figure 2).

3. Insert the labels into the supplied button caps bearing in mind the button cap

orientation (see Figure 1). Note that the button caps must be mounted with the

cap wings across the width of the faceplate, not along its length.

4. Place the button caps containing the new labels onto the button bases taking

care to ensure correct orientation of the button cap wings.

5. Reinstall the faceplate and screw the two faceplate attachment screws in

place.

Figure 1: Faceplate Showing Button Cap Wing Orientation

1 2

RC-3TB Remote Control Panel Congratulations on purchasing your Kramer RC-3TB Remote Control Panel. The RC-3TB is used to remotely replicate buttons

Figure 2 illustrates a sample button label sheet. Figure 2: Sample Button Label Sheet For the latest information on our products and a list of Kr

Keine Kommentare

Kramer-electronics RC-3TB Bedienungsanleitung