Kramer-electronics SPK-W612(PAIR) Bedienungsanleitung PDF herunterladen (Seite 7)

SPK-W612 - Installing the SPK-W612 5

4. Unscrew the negative (black) screw-type connector, insert the wire from the

negative terminal on the receiver, and retighten.

5. Unscrew the positive (red) screw-type connector, insert the wire from the

positive terminal on the receiver, and retighten.

6. Insert the brackets (see Section

4.3)

4.3 Installing the Mounting Bracket

To install the mounting brackets, as illustrated in Figure 2, do the following:

1. Insert the ballmount into the fixture (see Figure 2A

2. Insert the ABS screw mount into the fixture over the ball mount (see Figure

2B).

3. Using the bracket, or any metal piece, tighten the ABS screw.

4. Screw the fixture into the two threaded holes on the speaker (see Figure

2C).

5. Place the metal bracket on the two fixtures, insert the four bracket screws

and tighten (see Figure 2D

Figure 2: Installing the Fixed Bracket

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

Kramer-electronics SPK-W612(PAIR) Bedienungsanleitung Seite 7