Kramer-electronics PL-50 Bedienungsanleitung PDF herunterladen (Seite 17)

Connecting the PL-50 Power Controller - Monitor

6.3 Controlling via the Embedded Web Pages

The embedded Web page can be used to remotely operate the PL-50 via the

Ethernet (see section

6.2).

6.3.1 Setting the Embedded Web Page

Before you use the embedded Web pages to control the PL-50 via the

Ethernet, check that the Java™ software is installed on your computer. If not,

download it from:

www.java.com.

A description of each Web page appears if you hover with your mouse over the

question mark that appears on the left side of the screen.

To control the PL-50 via the embedded Web page, make sure that it is

connected to the Ethernet port of your computer and do the following:

1. Open your Internet browser.

2. Type the unit’s IP number

in the address bar of your browser (or the name, if

using DHCP):

Figure 11: Typing the IP Number

The following window appears:

Figure 12: Loading the Embedded Web Pages

1 The default IP number is 192.168.1.39, and may be changed by the system integrator

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Keine Kommentare

Kramer-electronics PL-50 Bedienungsanleitung Seite 17