Kramer-electronics RB-6 Bedienungsanleitung PDF herunterladen (Seite 14)

RB-6 - Connecting the RB-6

3. Optional—connect a PC via Ethernet over a LAN to the RB-6 for remote

control.

6.2 Connecting to the RB-6 via Ethernet

You can connect the RB-6 via Ethernet using a crossover cable (see

Section 6.2.1) for direct connection to the PC, or a straight through cable (see

Section 6.2.2) for connection via a network hub or network router.

After connecting the Ethernet port, you have to install and configure your Ethernet Port. For

detailed instructions, see the Ethernet Configuration Guide (Lantronix) in the technical support

section on our Web site http://www.kramerelectronics.com

6.2.1 Connecting the Ethernet Port directly to a PC

You can connect the Ethernet port on the RB-6 to the Ethernet port on your PC

via a crossover cable with RJ-45 connectors.

This type of connection is recommended for identification of the

factory default IP Address of the RB-6 during the initial configuration

To configure your PC after connecting the Ethernet port:

1. Right-click the My Network Places icon on your desktop.

2. Select Properties.

3. Right-click Local Area Connection Properties.

4. Select Properties.

The Local Area Connection Properties window appears.

5. Select the Internet Protocol (TCP/IP) and click the Properties Button.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 37 38

Keine Kommentare

Kramer-electronics RB-6 Bedienungsanleitung Seite 14