Kramer-electronics PL-8 Bedienungsanleitung PDF herunterladen (Seite 19)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Kramer Protocol

Note:

* Command required Admin login.

* New ID will done only after device resetting

* Connecting 2 devices with same ID over one KNET network could cause unexpected behavior.

7.3 Protocol 3000 Syntax

Protocol 3000 is used to control the PL-8 via an RS-232 connection using a

PC, touch screen, other serial controller or RC type controller.

7.3.1 Host Message Format

Start Address (optional) Body Delimiter

Destination_id@

Message

7.3.1.1 Simple Command

Command string with only one command without addressing:

Start Body Delimiter

Command SP Parameter_1,Parameter_2,… CR

7.3.1.2 Command String

Formal syntax with commands concatenation and addressing:

Start Address Body Delimiter

Destination_id@

Command_1 Parameter1_1,Parameter1_2,…|

Command_2 Parameter2_1,Parameter2_2,…|

Command_3 Parameter3_1,Parameter3_2,…|…

7.3.1.3 Device Message Format

Start Address (optional) Body delimiter

Sender_id@

Message

CR LF

7.3.1.4 Device Long Response

Echoing command:

Start Address (optional) Body Delimiter

Sender_id@

Command SP [Param1 ,Param2 …] result CR LF

CR = Carriage return (ASCII 13 = 0x0D)

LF = Line feed (ASCII 10 = 0x0A)

SP = Space (ASCII 32 = 0x20)

1 2 ... 14 15 16 17 18 19 20 21 22 23

Keine Kommentare

Kramer-electronics PL-8 Bedienungsanleitung Seite 19