Kramer-electronics RC-8000 Bedienungsanleitung PDF herunterladen (Seite 20)

Your Matrix Switchers

Table 5 and Table 6 define the features and functions of the RC-8000:

Table 5: RC-8000 Remote Controller Top Panel Features

# Feature Function

1 MACHINE IN

SYSTEM Buttons

Enable toggle between the standalone and the IN SYSTEM modes of any

switcher, and viewing the status and control of the corresponding switcher

(from

1 to 8)

2 INPUT Buttons Select the input to switch to the output (from 1 to 8)

3 Comm. Error LED The Comm. Error red LED illuminates when a connection between the remote

controller and a switcher fails

4 OUTPUT Buttons Select the output to which the input is switched (from 1 to 8)

5 OUTPUT

labels

Identifies a connection between the output and the input shown below it

STATUS

INPUT

Display

Displays the selected input switched to the output (marked above each input)

7 POWER LED (green)

Illuminates when power is activated

8 TAKE Button

(TAKE = CONFIRM)

Pressing TAKE toggles the mode between the CONFIRM mode

and the AT

ONCE mode (user confirmation per action is unnecessary)

9 STO Button Pressing STO (STORE) followed by an output button stores the current setting

(refer to section 8.2.1)

10 RCL Button Pressing the RCL (Recall) button and the corresponding OUT key recalls a setup.

Press the RCL button again to implement the new status (refer to section 8.2.2)

11 ALL Button

(ALL= All Outputs)

Pressing ALL before pressing an INPUT button, connects that input to all outputs

12 Three Screws Removing the three screws separates the base platform. By drilling three holes in

the desktop you can screw the remote controller directly in place

13 OFF Button

(OFF= All Inputs)

Pressing OFF after pressing an OUTPUT button disconnects that output from the

inputs. To turn off the connections, press the ALL button and then the OFF button

Table 6: RC-8000 Remote Controller Rear Panel Features

Feature Function

1 Power Socket +12V DC connector enabling power supply to the unit

2 RS-485 Connector RS-485 detachable terminal block port

1 Refer to section 7

2 For example, the switcher is not connected at all, or connected, but without power

3 When in Confirm mode, the TAKE button illuminates

4 For example, press ALL and then Input button # 2 to connect that input to all outputs

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare

Kramer-electronics RC-8000 Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schalttafel Kramer-electronics RC-8000