Kramer-electronics VP-460 Bedienungsanleitung PDF herunterladen (Seite 35)

30 VP-460 - The OSD Menu

Setting Function

Advanced Set:

V Keystone – to set the vertical keystone level E

Useful if the projector is located at an angle above or below the screen. In

the OSD menu the value range shows -80 to 80. This feature is disabled on

interlaced input

Auto Sync Off – to turn the auto sync On/Off.

When ON, 2 minutes after not detecting a valid video signal on the

selected input (or both inputs in the dual window mode), the unit will

disable the syncs and the audio on all the outputs, until a valid input is

again detected or any keypad button is pressed E

When using the VP-460 for audio only, we recommend that

you turn this feature off

Luma Keying – to set the transparency level of the PIP window (see

Section 5.8.1

Volatile parameter; screen may flicker

) E

Pause Set:

Freeze – to ON to freeze the window (freezing the main window will

also mute the audio output) M/P

Blank – to ON to display a blank window (blanking the main window

will also mute the audio output) M/P

Note that any change in the display mode, the input source

and/or the output resolution may cancel the freeze and

blank settings.

Mute – to ON to mute the audio output E

A mute icon appears on screen

Disable Output – to turn the sync and audio On/Off.

When ON, the unit will disable the syncs and mute the audio output

until any keypad button is pressed E

Once Disable Output is enabled, a countdown appears, letting you

cancel the process and revert to the previous state

Test Pattern Set the Test pattern to Slide Bar (non-HDCP), Color Bar (HDCP) or

Off.

Each test pattern includes a sinusoid audio signal at 10dB @1kHz.

We recommend that you set the Display Mode to Single Window (see

Section 5.2) and set the Output Resolution to 1080p (see 5.7Section

Note that the Color Bar test pattern changes the OSD menu coloring and the

following message appears on the display: “Ignore OSD Coloring”

Changing the output resolution will not cancel the test

pattern

Factory Reset

Reset to factory default values (see Section 9.1

Once Factory Reset is enabled, a countdown appears, letting you cancel the

process and revert to the previous state

) E

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 60 61

Kommentare zu diesen Handbüchern

Keine Kommentare

Kramer-electronics VP-460 Bedienungsanleitung Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Kramer-electronics VP-460