Kramer-electronics VP-728 Bedienungsanleitung PDF herunterladen (Seite 13)

Figure 2: VP-728 Presentation Switcher/Scaler Rear Panel

Feature

Function

UNIV. IN RCA Connectors

(from 1 to 4)

Y/CV

Connects to the video acceptor which can be either composite video (Y/CV), s-Video (Y/CV,

B/C ) or component video (Y/CV, PB/C, PR)

22 PB/C

23 PR

UXGA 1 IN 15-pin HD Connector

Connects to the UXGA (analog interface) graphics source 1

UXGA 2 IN 15-pin HD Connector

Connects to the UXGA (analog interface) graphics source 2

AUDIO IN UNIV. IN RCA

Connectors (from 1 to 4)

L/S/PDIF Connects to the left unbalanced stereo analog audio source. Alternatively, connect to a digital

audio source

27 R Connects to the right unbalanced stereo analog audio source

AUDIO IN 3.5 Mini Jack

UXGA 1 Connects to the unbalanced stereo analog audio source 1

29 UXGA 2 Connects to the unbalanced stereo analog audio source 2

AUDIO OUT RCA Connectors

L Connects to the left channel of the unbalanced stereo analog audio acceptor

31 R Connects to the right channel of the unbalanced stereo analog audio acceptor

32 S/PDIF Connects to a digital audio acceptor

33 AUDIO PROG Program Button Push to upgrade to the latest Kramer audio firmware. Release for normal operation

34 Terminal Block Connector Connects to a PC for audio firmware upgrade

35 HDMI 1 IN Connector Connects to the HDMI 1 source

36 HDMI 2 IN Connector Connects to the HDMI 2 source

HDMI OUT Connector

Connects to the HDMI acceptor

UXGA OUT 15-pin HD Connector

Connects to the video acceptor that displays the scaled output.

In the default HDTV mode, the signal is transmitted via 3 pins: PIN 1 is P

, PIN 2 is Y, PIN 3 P

RS-232 9-pin D-sub Connector

Connects to a PC or serial controller

Power Connector with Fuse

AC connector for connecting power to the unit

8 VP-728 – Overview

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 68 69

Keine Kommentare

Kramer-electronics VP-728 Bedienungsanleitung Seite 13