Kramer-electronics VP-731 Bedienungsanleitung PDF herunterladen (Seite 21)

16 VP-731 - Presentation Switcher / Scaler Buttons

6.2 The PIP Button Feature

The Picture-in-Picture inserter (PIP) uses K-IIT XL™ image insertion technology to

present video and graphic sources simultaneously so that you can display:

• An inserted video source PIP over a graphic source background

• An inserted graphic source PIP over a video source background

VIDEO SOURCE – can be composite or s-Video

GRAPHIC SOURCE – can be HDMI, UXGA or component

For example, you can show a live video window on top of a graphic background

and vice versa.

If the HDMI signal is HDCP protected, it cannot appear on a display that is not HDCP

compliant and the machine will not output a picture on the VGA output

The VP-731 supports three PIP modes:

• Picture-in-Picture, with a smaller window superimposed over a full screen

image

• Picture + Picture, where both images are placed side-by-side with the same

height

• Split, where both images appear side-by-side and the aspect ratios of both

images are maintained

6.2.1 Activating the PIP Feature

Activate the PIP feature in any of the following ways:

• Press and hold the PIP front panel button while pressing the input button of

the required PIP source

• Press the PIP key on the IR remote control transmitter (see Section

6.4)

• Access the OSD PIP menu (see

Figure 17) and selecting PIP On

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 68 69

Keine Kommentare

Kramer-electronics VP-731 Bedienungsanleitung Seite 21