Kramer-electronics VP-771 Bedienungsanleitung PDF herunterladen (Seite 53)

VP-771 - The Display Modes

7.2.3 Selecting the PIP Source

To select a PiP source you have to set the VP-771 to any of the PiP display mode

configurations and then select the desired input.

7.2.3.1 Selecting the PiP Source via the Front Panel Buttons

Press and hold the PIP front panel button while pressing the input button of the

required PiP source.

For example, to select CV 1 as the PiP source over DP as the main source, press

the PIP front panel button while pressing the CV 1 front panel button (see Figure

30).

In this example, the DP button is illuminated and the CV 1 button blinks

Figure 30: CV1 superimposed over DP

7.2.3.2 Selecting the PiP Source via the IR Remote Control Transmitter

Press the PIP button on the IR transmitter (the PIP front panel button is

illuminated). Press the desired PiP source button on the IR transmitter (see

Section 8.5).

7.2.3.3 Selecting the PiP Source via the REMOTE Terminal Block Connector

See Section 8.4.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 84 85

Keine Kommentare

Kramer-electronics VP-771 Bedienungsanleitung Seite 53