Kramer-electronics VP-773AMP Bedienungsanleitung PDF herunterladen (Seite 41)

VP-773AMP - The OSD Menu

Setting

Function

Advanced

Set:

V Keystone – to set the vertical keystone level E

Useful If the projector is located at an angle above or below the screen. In the

OSD menu the value range shows -80 to 80. For interlaced inputs, this feature is

disabled

Auto Sync Off – to turn the auto sync On/Off.

When ON, 2 minutes after not detecting a valid video signal on the selected

input (or both inputs in the dual window mode), the unit will disable the

syncs and the audio on all the outputs, until a valid input is again detected

or any keypad button is pressed to activate the machine (once restored, the

buttons return to their normal function) E

When using the VP-773AMP for audio only, we recommend

that you turn this feature off

Luma Keying – to set the transparency level of the PIP window (see

Section 6.8.1) E

Alert System – to set the Alert system On or Off (see Section 6.8.2) E

Pause

Set:

Freeze – to ON to freeze the window (freezing the main window will also

mute the audio output) M/P

Blank – to ON to display a blank window (blanking the main window will

also mute the audio output) M/P

Note that any change in the input source may cancel the freeze

and blank settings.

Mute – to ON to mute the audio output E

A mute icon appears on screen

Disable Outputs – to turn the sync and audio On/Off.

When ON, the unit will disable the syncs and mute the audio output until

any keypad button is pressed E

Once Disable Outputs is selected, a countdown appears, letting you cancel the

process and revert to the previous state

Protocol

Set the communication protocol to P3K or Legacy (see Section 12) E

When setting the Protocol to Legacy, some PC applications (for

example, K-Upload) as well as the Web pages may not function

properly.

Test Pattern

Set the Test pattern to Slide Bar (non-HDCP), Color Bar (HDCP) or Off.

Each test pattern includes a sinusoid audio signal at 10dB @1kHz.

We recommend that you set the Display Mode to Single Window (see

Section 6.2) and set the Output Resolution to 1080p (see Section 6.7).

Note that the Color Bar test pattern changes the OSD menu coloring and

the following message appears on the display: “Ignore OSD Coloring”

Factory Reset

Reset to factory default values (see Section 11.1) E

Once Factory Reset is selected, a countdown appears, letting you cancel the

process and revert to the previous state

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare

Kramer-electronics VP-773AMP Bedienungsanleitung Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Kramer-electronics VP-773AMP