Kramer-electronics VP-790 Bedienungsanleitung PDF herunterladen (Seite 42)

VP-790 - Firmware Upgrade

4. Plug in a USB cable between the VP-790 and the PC.

5. Using the VP-790 Updater Tool application, click Browse and select the

location of the desired BREC file to be programmed into the Unit.

6. Click Update Firmware.

When the VP-790 has finished programming you will see a “Firmware update complete”,

dialog box (this will take a minute or two).

7. After firmware update is complete, click OK.

8. Unplug the USB cable from the VP-790 unit.

9. Exit the VP-790 Updater application.

Do this only after disconnection,

10. Power cycle the VP-790 for the firmware update to take effect.

11. If you wish to restore the user settings go to Section 8.2

1 2 ... 37 38 39 40 41 42 43 44 45 46 47

Keine Kommentare

Kramer-electronics VP-790 Bedienungsanleitung Seite 42