Kramer-electronics VM-1110xl Bedienungsanleitung PDF herunterladen (Seite 11)

Connecting Your VM-1110xl

6.3 Connecting a 1:5 Stereo DA

To connect

the VM-1110xl as a 1:5 stereo DA, as the example in Figure 4

illustrates, do the following:

1. Connect one stereo audio source (for example, a stereo audio player) to

INPUT A (left channel) and INPUT B (right channel) on the rear panel.

2. Connect up to 5 audio acceptors

to the OUT connectors (left channels to

OUT A and right channels to OUT B) on the rear panel.

3. On the front panel, press IN the 1:10 / 2x1:5 button.

4. Connect the power cord to the electricity supply.

5. Switch on the VM-1110xl.

The audio input is distributed to the audio outputs.

Figure 4: Connecting the VM-1110xl as a 1:5 Stereo DA

1 Switch OFF the power on each device before connecting it to your VM-1110xl. After connecting your VM-1110xl, switch on

its power and then switch on the power on each device. Not all outputs need to be connected

1 2 ... 6 7 8 9 10 11 12 13 14

Keine Kommentare

Kramer-electronics VM-1110xl Bedienungsanleitung Seite 11