Kramer-electronics VS-3232DN Bedienungsanleitung PDF herunterladen (Seite 30)

26 VS-3232DN - Using the Configuration Menus

8 Using the Configuration Menus

The configuration menus let you configure the VS-3232DN to best suit your needs.

There are two configuration menus:

• Setup Menu—those that are accessed on a regular basis (for example,

storing setups and setting the delay), see

Section 8.1

• Config Menu—those that are accessed only occasionally (for example,

setting the interface or communication protocol), see

Section 8.2

The following rules apply to the menu operation:

• If no selection is made within approximately 15 seconds, the operation

times-out and the display reverts to the output/input display

• At any point in the Menu, press ESC to move up one level or press

BREAKAWAY to exit the Menu altogether

• At any point in the Menu, only buttons that are active light or flash

• All of the procedures in this section assume that you are starting the

procedure from the standard, operational output/input display

8.1 Using the Setup Menu

The Setup Menu provides access to settings that are regularly changed and

comprises the following options:

• 1: inXX=>ALL, switching one input to all outputs (see

Section 8.1.1

• 3: outXX=OFF, turning off an output (see

)

Section 8.1.2

• 7: EDID, assignment to an output (see

)

Section 8.1.3

• 9: Delay setting for an output (see

)

Section 8.1.4

• 4: store setup XX, storing the setup in a preset (see

)

Section 8.1.5

• 6: recall setup XX, recalling a preset (see

)

Section 8.1.6

)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 79 80

Keine Kommentare

Kramer-electronics VS-3232DN Bedienungsanleitung Seite 30