Kramer-electronics VM-1055 Bedienungsanleitung PDF herunterladen (Seite 10)

8 VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010

Note:

• Terminate unused inputs to 75, and terminate active inputs at the

connecting source

• Remember, the output signal format matches the input signal format (for

example, if the input is composite, the output is composite)

• All signal cables to each device should be of equal length (for example, the

R,G,B cables between a camera and the amplifier should be of equal length)

4.3 VM-1010 Technical Specifications

INPUTS: 2 composite/component video, looping, 1Vpp/75 on

BNC connectors with termination switch

OUTPUTS: 2x5 composite/component video, 1Vpp/75 on BNC

connectors

MAX. VIDEO OUTPUT: 1.8Vpp

VIDEO BANDWIDTH (-3DB): 235MHz

DIFF. GAIN: 0.2%

DIFF. PHASE: 0.04Deg

K-FACTOR: <0.05%

VIDEO S/N RATIO: 77dB

NON-LINEARITY: 0.2%

CONTROL: Level: 1.4dB to +2.5dB, EQ.: 0 to +2.5dB @4.4MHz

COUPLING: DC or AC (user selectable)

POWER SOURCE: 230V AC, 50/60Hz (115V USA), 10.3VA

OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F)

STORAGE TEMPERATURE: -45° to +72°C (-49° to 162°F)

HUMIDITY: 10% to 90%, RHL non-condensing

DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable

WEIGHT: 1.98kg (4.4lbs) approx.

ACCESSORIES: Power cord

Specifications are subject to change without notice at http://www.kramerelectronics.com

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Keine Kommentare

Kramer-electronics VM-1055 Bedienungsanleitung Seite 10