Kramer-electronics VM-1055 Bedienungsanleitung PDF herunterladen (Seite 25)

VM-1010, VM-1021, VN-1055, VM-54 - Your VM-54 23

Note:

• Terminate unused inputs to 75, and terminate active inputs at the

connecting source

• Remember, the output signal format matches the input signal format (for

example, if the input is composite, the output is composite)

• All signal cables to each device should be of equal length (for example, the

R,G,B cables between a camera and the amplifier should be of equal length)

7.3 VM-54 Technical Specifications

INPUTS: 3 composite/component video looping, 1Vpp/75 on

BNC connectors with termination switches

OUTPUTS: 3x18 composite/component video, 1Vpp/75 on BNC

connectors

MAX. VIDEO OUTPUT: 2Vpp

VIDEO BANDWIDTH (-3DB): 365MHz

DIFF. GAIN: 0.03%

GAIN RANGE: -0.8 to 1.9dB

DIFF. PHASE: 0.09Deg

EQ. RANGE: 0 to 2.3dB @4.4MH

K-FACTOR: <0.05%

VIDEO S/N RATIO: Better than 70dB

CONTROL: 75 termination switches on each input

NON-LINEARITY: 0.2%

COUPLING: AC or DC for each channel, selectable from front panel

POWER SOURCE: 230V AC, 50/60Hz, (115V AC USA) 10VA

OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F)

STORAGE TEMPERATURE: -45° to +72°C (-49° to 162°F)

HUMIDITY: 10% to 90%, RHL non-condensing

DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable

WEIGHT: 4.4kg (9.8lbs) approx.

ACCESSORIES: Power cord

Specifications are subject to change without notice at http://www.kramerelectronics.com

1 2 ... 20 21 22 23 24 25 26 27

Keine Kommentare

Kramer-electronics VM-1055 Bedienungsanleitung Seite 25